3V 5V 1X1 1x2 1x4 2X2 Fiber Mechanical Optic Switch MM type 850nm
B 1x4
MechanicalOptical Switch.pptx
| ◇Description |
The Series 1x4 fiber optic switch connects optical channels by
redirecting an in- coming optical signal into a selected output
fiber. This is achieved by using a patent pending opto-mechanical
configuration activated via an electrical control signal.
Latching operation preserves the selected optical path after the
drive signal has been removed. The switch has integrated electrical
position sensors, and the new material based advanced design
significantly reduces moving part position sensitivity, offering
unprecedented high stability as well as an unmatched low cost.
Electronic driver is available for this series of switches. |
| ◇Features: |
- Channel Blocking
- configurable add/drop
- system monitoring
- instrumentation
|
| ◇ Application: |
- unmatched low cost
- low optical diatortions
|
specification
| Parameters | Specifications | Unit |
| Operating Wavelength | 1260~1620(SM),850(MM) | nm |
| Insertion Loss | ≤1.0 | dB |
| Wavelength Dependent Loss | ≤0.25 | dB |
| Polarization Dependent Loss | ≤0.05 | dB |
| Temperature Dependent Loss | ≤0.25 | dB |
| Return Loss | SM≥50 MM≥30 | dB |
| Cross Talk | SM≥50 MM≥35 | dB |
| Switch Time | ≤8 | ms |
| Repeatability | ≤±0.02 | dB |
| Durability | ≥107 | times |
| Operating Voltage | 3 or 5 | V |
| Switch Type | Non-Latching/Latching | |
| Operating Temperature | －20~＋70 | ℃ |
| Storage Temperature | －40~＋85 | ℃ |
| Optical Power | ≤500 | mW |
| Dimension | 23.0L×27.0W×8.2H | mm |
◇pins
latching type
| Type | OpticalRoute | Relay | Electric Drive | State Sensor |
| T1×4 | Pin 1 | Pin 5 | Pin 6 | Pin 10 | Pin 2‐3 | Pin 3‐4 | Pin 7‐8 | Pin 8‐9 |
| Latching | Input‐ Port 1(Black) | Relay1 | ‐‐ | ‐‐ | GND | V＋ | Close | Open | Open | Close |
| Relay2 | V＋ | GND | ‐‐ | ‐‐ | Open | Close | Close | Open |
| Input‐ Port 2 (red) | Relay1 | V＋ | GND | ‐‐ | ‐‐ | Open | Close | Close | Open |
| Relay2 | ‐‐ | ‐‐ | GND | V＋ | Close | Open | Open | Close |
| Input‐ Port 3(blue) | Relay1 | ‐‐ | ‐‐ | GND | V＋ | Close | Open | Open | Close |
| Relay2 | ‐‐ | ‐‐ | GND | V＋ | Close | Open | Open | Close |
| Input‐ Port 4(White) | Relay1 | V＋ | GND | ‐‐ | ‐‐ | Open | Close | Close | Open |
| Relay2 | V＋ | GND | ‐‐ | ‐‐ | Open | Close | Close | Open |
Non-latching type
| Type | OpticalRoute | Relay | Electric Drive | State Sensor |
| 1×4 | Pin 1 | Pin 5 | Pin 6 | Pin 10 | Pin 2‐3 | Pin 3‐4 | Pin 7‐8 | Pin 8‐9 |
| Non‐ Latching | Input‐ Port 1(Black) | Relay1 | ‐‐ | ‐‐ | ‐‐ | ‐‐ | Close | Open | Open | Close |
| Relay2 | V＋ | ‐‐ | ‐‐ | GND | Open | Close | Close | Open |
| Input‐ Port 2 (red) | Relay1 | V＋ | ‐‐ | ‐‐ | GND | Open | Close | Close | Open |
| Relay2 | ‐‐ | ‐‐ | ‐‐ | ‐‐ | Close | Open | Open | Close |
| Input‐ Port 3(blue) | Relay1 | ‐‐ | ‐‐ | ‐‐ | ‐‐ | Close | Open | Open | Close |
| Relay2 | ‐‐ | ‐‐ | ‐‐ | ‐‐ | Close | Open | Open | Close |
| Input‐ Port 4(White) | Relay1 | V＋ | ‐‐ | ‐‐ | GND | Open | Close | Close | Open |
| Relay2 | V＋ | ‐‐ | ‐‐ | GND | Open | Close | Close | Open |
◇dimensions
◇Mechanical diamesion(unit:mm)
◇optical route
◇Ordering Information
| T14 | | | | | | | | | Type | Wavelength | Switch Type | Voltage | Fiber Type | Package | Fiber Length | Connector | | Special＝00 | 1060＝1 | Latching＝1 Non-latching＝2MINI Latchi ng＝3MINI Non-la tching＝4
Special＝0 | 3V=3 | SM28=1 | Bare fiber=1 | 0.25m=1 | None=1 FC/PC=2 FC/APC=3 SC/PC=4 SC/APC=5 ST/PC=6 LC/PC=7Duplex LC=8
Special＝0 | | C＋L＝2 1310＝31410＝4 | 5V=5Special＝0 | 50/125=562.5/125=6Special＝0 | 900um tube=3Special＝0 | 0.5m=21.0m=3Special＝0 | | 1550＝5 | | | | | | 650＝6 | | | | | | 780＝7 | | | | | | 1260-1610=A | | | | | | 1310/1550＝9 | | | | | | 850=8 | | | | | | Special＝0 | | | | |
|
other products
company profile
Shenzhen Jiangfan Communication Equipment Co., Ltd. is a
comprehensive enterprise integrating R&D, production, sales and
service.
The company promotes production efficiency and reduces product
costs through continuous technological innovation and new process
applications.
The company's high-quality products, reasonable prices, and
accurate delivery date to cooperate with customers.
Shenzhen Jiangfan Communication Equipment Co., Ltd. is a
comprehensive enterprise specializing in design, development,
production and processing:
The company has processing equipment: plastic injection molding
machine, CNC machining center, CNC lathe, sheet metal bending,
laser, riveting, polishing machine, ultrasonic, milling machine,
wire cutting, punching machine, surface grinder, quality control
equipment, projector, micrometer, ring gauge Product control
degree, etc. We have rich experience in supporting production, high
quality control, high efficiency, and high-quality after-sales
service. The company has an enterprise team with professional
skills and dedication and 8 years of manufacturing experience. The
company has established long-term and stable cooperative relations
with many scientific research units, research universities .
FAQ
Q:Do you offer OEM services?
A: We accept OEM, ODM. Cable sizes and materials can be customized.
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q:When our company be established?
A: We started from year 2013
Q: Can you provide samples for customers?
A: Yes, but the shipping will be charged on the customer's account.
Q:Can you design and customize production according to my
requirements
A:Yes, you can tell us your requirements and ideas, we can design
drawings, or provide samples, 2D floor plans or 3D drawings
(support proe, solidwork, core, Auto CAD, DXF, DWG, step file
formats.
